Please be advised of the planned opening of the entire length of the Albany Ring Road on Sunday 19 May 2024, now that the construction works are almost complete on Phase 2, between South Coast Highway and Princess Royal Drive, as shown in the map link below:

Albany Ring Road Map – May 2024

As such, once the Phase 2 section of the new road is opened to the public, the entire length of the Albany Ring Road between Albany Highway and Albany Port Road (Princess Royal Drive) is approved for the following Restricted Access Vehicle (RAV) Networks:

• Tandem Drive Networks 2-7
• Tandem Drive Concessional Networks N2.1-7.1, N2.2-7.2 & N2.3-7.3
• Tri Drive Networks TD1-4
• Tri Drive Concessional Networks TD1.1-4.1, TD1.2-4.2 & TD1.3-4.3
• Performance Based Scheme Tandem Drive Networks PBS1B.1-2B.1, PBS1B.2-2B.2 & PBS1B.3-2B.3
• Performance Based Scheme Tri Drive Networks PBSTD1B.1-2B.1, PBSTD1B.2-2B.2 & PBSTD1B.3-2B.3
• Performance Based Scheme Tri Drive Quad Axle Networks PBSTDQ1B.1-2B.1, PBSTDQ1B.2-2B.2 & PBSTDQ1B.3-2B.3
• Oversize Divisible Products Networks 2-6

With the full opening of the Albany Ring Road, the following RAV Network changes will also apply.

• RAV Network access is removed from Albany Port Road (Hanrahan Road) between the Chester Pass Rotary and Cuming Road.
• The following local access condition applies to the current RAV Networks on Albany Highway between Menang Drive and the Chester Pass Rotary and on South Coast Highway between Menang Drive and the Chester Pass Rotary.

Operators are also reminded the above local access condition still applies to the current RAV Networks on Link Road.


Heavy Vehicle Services
16 May 2024

Please note: This HVS Update will be published until the relevant Road Tables and RAV Mapping Tool have been updated on our website.