Wind Farm Blade Transport

From 30 May 2023 to early September 2023, there will be some Oversize Overmass (OSOM) movements between Bunbury Port to the new Flat Rocks Wind Farm in Broomehill West.

Published: 29 May 2023, Updated: 29 May 2023

These traffic movements will occur Mondays to Saturdays, commencing at 5am leaving Bunbury Port, arriving at their destination at Flat Rocks Wind Farm in Broomehill West approximately 5pm.

The truck movements will be transporting wind turbine equipment. The expected safe travelling speeds, due to the size of the load and the surrounding roadside furniture is approximately 50-60Kph. These speeds will be a lot slower during turning manoeuvres.

 To see the exact route visit Enel Green Power’s site Flat Rocks Wind Farm Stage 1 Project - Enel Green Power.

 See map below for the full route:

Wind Farm Blade Transport - May to August 2023
Click image to enlarge

What does that mean for me?

Pilots and the Traffic Escort Warden will control traffic. During the OSOM load turning movements, all traffic will be stopped to allow sufficient space whilst turning. During general transit, the OSOM load may require more than one lane to travel in. Pilots will control any opportunity for passing vehicles. On single lane carriageways, oncoming vehicles will be positioned onto the shoulder and/or made to wait until the OSOM Loads has passed. On multi lane carriageways, the Pilots may decide to close all lanes resulting in no overtaking opportunities.

What do I when I encounter this OSOM convoy?

Please be patient, and follow direction of all Traffic Escorts and Pilots.

Know what to do when it’s bigger than you #biggerthanyou

Back to News and media

Acknowledgement of country

The Government of Western Australia acknowledges the traditional custodians throughout Western Australia and their continuing connection to the land, waters and community. We pay our respects to all members of the Aboriginal communities and their cultures; and to Elders both past and present.

Tell us what you think

Help us improve our website by sharing your thoughts and suggestions.

Provide feedback