4.1.1 |
Cover Sheet |
|
To include: -
Project Name Road Section SLK's Local Authority Contract Number Drawing Sets Included i.e. |
Drawings - Roadwork |
|
|
Drawings - Cross Sections |
|
|
Drawings - Major Signs |
|
|
Drawings - Bridgeworks |
|
|
Drawings - Electrical |
|
|
Drawings - Standard |
|
|
Drawings |
|
|
|
4.1.2 |
Locality Plan & Index Sheet |
|
To include:
Locality Plan - scale to suit Project Name Road Section SLK's Local Authority Index of All Drawings
|
|
|
Note: It may be necessary to produce a separate drawing for the Locality Plan and a separate drawing for the Index Sheet. |
|
|
|
4.1.3 |
Design Criteria |
|
To include: - |
|
|
Geometry |
Design Speed Horizontal &Vertical |
|
|
Proposed Posted Speed |
|
|
Design Vehicle Types |
|
|
Variations to Standard Sight Distance |
|
|
|
|
Drainage |
Event Recurrence Interval |
|
|
Pavement Spread Width |
|
|
Serviceability (Passibility) |
|
|
Retention Basin Criteria |
|
|
|
|
Electrical |
Lighting Category |
|
|
Traffic Signals |
|
|
Emergency Telephones |
|
|
|
|
Miscellaneous |
Pavement Design |
|
|
Safety Barrier Test Level |
|
|
Noisewalls |
|
|
Retaining Walls
|
|
Note: It may be necessary to produce a separate plan for the Design Criteria or it may be included on the index sheet depending on the actual criteria used. |
|
|
|
4.1.4 |
Scheme Plan / Concept Plan |
|
To include: (Scale - 1:1000 or 1:2000)
Detail i.e. houses, contours, local streets etc. Proposed Design Proposed Road Layouts Dual Use Paths Noise Bunds Cadastral Boundaries Land Requirement Boundaries Significant Features i.e. bridges, rivers, major roads etc. |
|
|
|
4.1.5 |
Site Plan |
|
To include: (Scale - 1:1000 or 1:2000 or to suit)
Proposed Design or Reference Line Boundary of Site Site Access Points Local Streets Restricted Areas i.e. dieback, special vegetation, historical sites, road closures etc.
|
|
|
|
4.1.6 |
Staging Plan |
|
To include: (Scale - 1:2000, 1:5000 or to suit)
Various Stages of Construction Differently Hatched Proposed Structures Temporary Works i.e. detours, temporary alignments etc. Ties to Previous Construction
|
|
|
|
4.1.7 |
Road Reference Marks |
|
To include: (Scale - 1:1000 or 1:2000)
Cadastral Boundaries Grid and Co-ordinates Road Reference Marks Table Showing: - Road Reference Mark Number Easting, Northing and Level
Note: Road Reference Marks have been previously referred to as Construction Control Points. Alternatively depending on the number of marks and space available, road reference mark numbers, co-ordinates and levels can be included in a table on the Plan / Profile Drawings. |
|
|
|
4.1.8 |
Alignment Plan |
|
Note: Alignment Plans are no longer required to be produced as part of the Main Roads drawing documentation. All necessary setout information for the design reference lines is included in the MX genio file and string reports, which are to be provided as part of the contract documentation. |
|
|
|
4.1.9 |
Services / Utilities Plan |
|
To include: (Scale - 1:250, 1:500 or 1:1000)
Proposed Design Existing Feature Survey Grid and Co-ordinates Cadastral Boundaries Land Requirement Boundaries Existing Drainage Pipes and Structures Proposed Drainage and Subsoil Drainage Pipes and Structures Existing and Proposed Services Existing and Proposed Lighting Poles, Pits, Ducts etc Existing and Proposed Emergency Telephone Ducts, Pillars etc Existing and Proposed General Service Ducts Existing and Proposed Traffic Signal Poles, Pits, Ducts etc Safety Barriers / Guardrail Pedestrian Ramps Rock Protection
Note: It may be possible to combine this drawing with the drainage plan and/or intersection layout if room permits.
Service plans should be generated in colour, highlighting the different proposed and existing services, while the background information and proposed design should be shown in monochrome. |
|
|
|
4.1.10 |
Plan and Profile |
|
To include: (Scale - 1:1000H/1:100V or 1:2000H/1:200V)
PLAN Proposed Design Existing Feature Survey Cadastral Boundaries Land Requirement Boundaries Existing Contours Off Road Drainage Road Reference Marks Grid and Co-ordinates String Labels for Reference Lines and Edge Strings Reference Line Chainage(s) Road Names North Point Carriageway and Shoulder Widths (where applicable) SLK's at match lines
PROFILE Main Reference String(s) Edge String(s) Existing Ground String String Labels for Reference, Edge and Existing Ground Strings Levels on Reference String(s) Levels on Existing Ground String Levels on Edge String(s) Cut and Fill Information Pavement Type Locations Safety Barrier Locations Chainage Superelevation Horizontal and Vertical Geometry for Reference String Traffic Control Devices (for some rural projects)
Note:
- Both main reference lines of a dual carriageway may be drawn on a single
drawing where chainage differences will not cause problems.
- Separate plan and profiles shall be drawn for side roads and freeway ramps.
- Road Reference Marks may be included if a separate plan is not necessary and room permits.
- Vertical geometry information can be either detailed in "V.P.I. Box" layout
as shown on drawing number 200331-033 or in "Profile Box" format as shown on drawing number 200331-038.
|
|
|
|
4.1.11 |
Accommodation Works |
|
To include: (Scale - 1:250 or 1:500)
Proposed Design Existing Feature Survey Cadastral Boundaries Land Requirement Boundaries Blend Areas Areas of Widening Brick / Limestone Paving Limits Concrete Infill Landscaping Driveway Locations Retaining Walls, Noise Walls and Structures Safety Barriers / Guardrail Pedestrian Ramps Shared Path Details Batter Treatments String Labels |
|
|
|
4.1.12 |
Extent of Pavement and Surfacing Types |
|
To include: (Scale - 1:500, 1:1000 or 1:2000)
Proposed Design Existing Roadway to be Retained Limits of Proposed and Existing Pavements Pavement Legend
|
|
|
|
4.1.13 |
Cross Sections |
|
To include: (Scale - 1:100, 1:200 or 1:400 H & V)
Proposed and Existing Sections Proposed Offsets and Levels Existing Levels Inclusion of Specific Services as Required String Labels Highlight Main Reference String Interval of 10m, 20m, 40m or 50m as Required Specific Cross Sections as Required |
|
|
|
4.1.14 |
Intersection Layout |
|
To include: (Scale - 1:250 or 1:500)
Proposed Design Existing Feature Survey Cadastral Boundaries Land Requirement Boundaries Blend Areas Areas of Widening Existing and Proposed Services Culverts, Drainage and Off Road Drainage String Labels Curve Radii Tangent Points Typical Dimensions Carriageway, Lane and Shoulder Widths Reference to Design Vehicle Used |
|
|
|
4.1.15 |
Side Road Profile and Cross Sections |
|
To include: (Scale - 1:250H/1:25V or 1:200H/1:20V or to suit)
PROFILE Main Reference String Edge String Existing Ground String String Labels for Reference, Edge and Existing Ground Strings Levels on Reference String Levels on Edge String Cut and Fill Information Pavement Type Locations Safety Barrier Locations Chainage Superelevation Horizontal and Vertical Geometry for Reference String
CROSS SECTIONS Proposed and Existing Sections Proposed Offsets and Levels Existing Levels Inclusion of Specific Services as Required String Labels Highlight Main Reference String Interval of 10m or 20m Specific Cross Sections as Required |
|
|
|
4.1.16 |
Typical Cross Sections |
|
To include: (Scale - 1:50, 1:100 or to suit)
Typical / Representative Cross Sections Typical Dimensions Crossfalls and Slopes Batter Slope Details Project Specific Details Superelevation Transition and Rounding Detail Crown Treatment Detail |
|
|
|
4.1.17 |
Typical Pavement Types |
|
To include: (Scale - 1:50, 1:100 or to suit)
Typical / Representative Cross Sections Typical Dimensions Payment Details Pavement Material Type and Limits Pavement Material Depth Reference to Pavement Design Report Project Specific Details |
|
|
|
4.1.18 |
String Labelling Details |
|
To include: (Scale - 1:50, 1:100 or to suit)
Typical / Representative Cross Sections Highlight Main Reference String String Labels Project Specific Details |